This engine is no different than that of your car but with a tiny exception that the power is driven to a special shaped rotary propeller, instead of the wheels. The engine needs the regular attention itself, bearing spark plugs that have to be changed at specific intervals and oil and coolant check. You also need to check if the optimum performance is optimum and if there is a sudden lack of power, it could be because of many reasons. This article enlists the best ways to use the outboard motor.
- Prevent the cold starts
When you fire up your motor after a few months of inactiveness, ensure to run the engine idle for 5 minutes at least to let the engine oil to fully circumvent the system. And once the system runs at a running temperature, you can give it some slow but steady throttle and notice a strong flow of water emitting out from the cooling duct.
- Regular servicing
If the motor is old and you have no idea where it has come from, then you need to replace it with a new unit and when you choose to install Torqeedo Ultralight for sale, you know you have made a good choice.
- High octane fuel
Here you need to check with the manufacturer because the highlight the suggested octane petroleum that can be used and the fuel system that is needed to be cleaned out periodically because the sediment may accumulate and lead to fuel starvation and eventually, loss of power.
- High grade lubrication
Always invest in a premium oil when changing it and make sure that you do this at specified intervals. The motor manufacturer would have mentioned this in the user manual along with the type of engine oil that can be used. There is a distinction between premium and standard engine oil. This becomes noticeable when the engine works hard and the hotter the engine gets, the more oil properties wear away.
- Check the propeller
This propeller must be replaced in every 1000 hours because this metallic piece is subject to serious erosion when it cuts through the salt water. When the time passes, the propeller shrinks. In other words, there is less surface area to interact with water, hence reducing the power overall. For similar insights, visit the website.